ESQ Cooling
The following cooling accessories are available for the ESQ product line: Dual Fan Panels | Fan Trays | Packaged Blowers | 2U Rack Mount Blowers | Single Fan Panels.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |
Packaged Blowers
Packaged blowers effectively cool critical electronic components within an enclosure by means of clean positive air pressure. Crenlo offers five different blowers with performance ratings ranging from 125CFM – 500CFM.
|
|
|
Blower |
2U Rack Mount Blower
The 2U rack mount blower is designed to cool your enclosure from the bottom up by drawing cool air from the floor level and blowing it up through the front of the electronics.
|
|
|
2U Blower |
Single Fan Panel
Single Fan Panels aid in creating proper air flow inside of the enclosure. Mount this in the top opening of the enclosure.
|
|
|
Single Fan Panel |
G-Series Cooling
The following cooling accessories are available for the G-Series product line: Dual Fan Panels | Fan Trays | Packaged Blowers | 2U Rack Mount Blowers.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |
Packaged Blowers
Packaged blowers effectively cool critical electronic components within an enclosure by means of clean positive air pressure. Crenlo offers five different blowers with performance ratings ranging from 125CFM – 500CFM.
|
|
|
Blower |
2U Rack Mount Blower
The 2U rack mount blower is designed to cool your enclosure from the bottom up by drawing cool air from the floor level and blowing it up through the front of the electronics.
|
|
|
2U Blower |
10 Series Cooling
The following cooling accessories are available for the 10 Series product line: Dual Fan Panels | Fan Trays | Packaged Blowers | 2U Rack Mount Blowers | Single Fan Panels | Pagoda Tops.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |
Packaged Blowers
Packaged blowers effectively cool critical electronic components within an enclosure by means of clean positive air pressure. Crenlo offers five different blowers with performance ratings ranging from 125CFM – 500CFM.
|
|
|
Blower |
2U Rack Mount Blower
The 2U rack mount blower is designed to cool your enclosure from the bottom up by drawing cool air from the floor level and blowing it up through the front of the electronics.
|
|
|
2U Blower |
Single Fan Panel
Single Fan Panels aid in creating proper air flow inside of the enclosure. Mount this in the top opening of the enclosure.
|
|
|
Single Fan Panel |
Pagoda Tops
The pagoda top is designed to allow air flow through the enclosure by means of cooling holes on the under-side of the top overhang while providing protection for electronic equipment. Mount this to the top of the enclosure.
|
|
|
|
Pagoda Fan Panel |
Pagoda Impellor Fan |
isoNet Cooling
The following cooling accessories are availabe for the isoNet product line: Dual Fan Panels | Fan Trays | Packaged Blowers | 2U Rack Mount Blowers | Cable Access & Fan Panel.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |
Packaged Blowers
Packaged blowers effectively cool critical electronic components within an enclosure by means of clean positive air pressure. Crenlo offers five different blowers with performance ratings ranging from 125CFM – 500CFM.
|
|
|
Blower |
2U Rack Mount Blower
The 2U rack mount blower is designed to cool your enclosure from the bottom up by drawing cool air from the floor level and blowing it up through the front of the electronics.
|
|
|
2U Blower |
Cable Access Panels
Cable access Panels include (2) two cable entry ports with edge protective plastic grommets. The cable access panel is designed to be used in conjunction with Alternate Top Panels. This design offers flexibility by allowing sensitive cabling to stay in place if removal of an Alternate Top Panel is required.
|
|
|
Cable Access Panel |
Alternate Top Panels
Alternate top panels are to be used in conjunction with the Cable Access Panel. This design offers flexibility by allowing sensitive cabling to stay in place if removal of an Alternate Top Panel is required.
|
|
|
Top Fan Panel |
FP1 Cooling
The following cooling accessories are available for the FP1 product line: Dual Fan Panels | Fan Trays.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |
FP2 Cooling
The following cooling accessories are available for the FP2 product line: Dual Fan Panels | Fan Trays.
Dual Fan Panels
Dual Fan Panel can be mounted on the front or rear of an enclosure to assist with proper air flow in a populated enclosure.
|
|
|
|
Exhaust |
Intake |
Fan Trays
Fan trays are primarily used for spot cooling within an enclosure.
|
|
|
|
3 Fan |
6 Fan |