ESQ Bottom and Base Options

The following bottom and base options are available for the EQS product line: Pontoon Base  |  Caster Dolly  |  Closure Panel.

Pontoon Base
A plain pontoon base is supplied with each frame. Pontoon bases with duplex outlets located in either the front or rear can be ordered in place of the plain pontoon base.

Pontoon Base	Pontoon Outlet	Pontoon Slope Wedge	Pontoon Vertical Wedge

 

---

Caster Dolly
Caster dollies provide easy movement of floor standing frames over a rough or uneven environment. The casters and optional floor lock must be ordered separately.

Caster Dolly

---

Closure Panel
Closure panels are designed to close off the entire, or portions of, the top, front, rear, or slope opening of a frame. The following closure panel options are available:

Solid	Vented	Louvered	Perforated	Aluminum	Laminate

G-Series Bottom and Base Options

The following bottom and base options are available for the G-Series product line: Bottom Panels. 

Bottom Panels
Bottom panels are designed to close off the bottom of the frame.

Solid	Peforated

10 Series Bottom and Base Options

The following bottom and base options are available for the 10 Series product line: Bottom Panels  |  Pontoon Bases  |  Fork Lift Base  | Anti-Tip Base.

Bottom Panels
Bottom panels are designed to mount to the bottom of the frame.

Solid	Peforated

---

Pontoon Base
A pontoon base is available for applications where raising the enclosure above the floor is required. A pontoon base is also used when an electrical outlet is needed in the lower outside area of the frame.

Pontoon Base	Pontoon Base with Outlet	Vertical Wedge	Slope Front Wedge

 

---

Fork Lift Base
This base is designed for applications where movement of the populated frame by a fork-lift is necessary. The base provides for front, rear, and side access.

Fork Lift Base

---

Anti-Tip Base
This base can be used for anti-tip requirements or as a caster dolly by adding casters. Casters must be ordered separately.

Anti-tip Base

isoNet Bottom and Base Options

The following bottom and base options are available for the isoNet product line: Bottom Panel  |  Anit-Tip Plate.

Bottom Panel and Rear Cable Access Cover
The bottom panel and rear cable access cover is for applications where access through the frame in the base opening or rear cable access area is not required.

Bottom panel	Rear cable access cover

---

Anti-Tip Plate
Anti-Tip plates provide additional stability for the populated enclosure. It can be installed on the frame at the front, rear, or both.

Anti-tip Plate