ESQ Frame Options

ESQ frames are fully welded and can handle 800lbs. of equipment evenly distributed. Available in 19" 24" and 30" rack mount widths, they provide for secure mounting of electronic equipment. The following options are available: Vertical  |  -WT  |  Slope Front  |  Low Silhouette  |  Wedge  |  Turret, Instrument, Riser.

Vertical
Vertical frames provide for secure mounting of your electronic equipment in seven heights, three depths and three panel widths. Each frame includes 2 pairs of adjustable "thru hole" EIA mounting angles, a pontoon base and a hardware kit. 

-WT
These frames are available with provisions for front mount writing tops. Each frame includes 2 pairs of adjustable "thru hole" EIA mounting angles, a pontoon base and a hardware kit. 

Slope Front
Slope front frames are ideal for the development of console configurations. They include front and rear adjustable "thru hole" EIA mounting angles, non-adjustable fixed angles in the top and slope openings, a pontoon base and a hardware kit.

Low Silhouette
Low silhouette frames provide for full mounting capability of instrumentation while maintaining a low profile for viewing over the console. Each frame includes front and rear adjustable "thru hole" EIA mounting angles, non-adjustable fixed angles in the front and rear slopes and in the extended arm, a pontoon base and a hardware kit.

                                        

Low Sihouette

Wedge
Vertical wedge frames also referred to as “Flat Pack Wedge Kits”, due to the way they ship, are for use in wrap around console configurations. These wedge frames are to be bolted side by side to other cabinets of any panel width or combination of panel widths to form your desired console configuration.

Slope front wedge frames are of fully welded construction and utilize solid non-removable front, top and rear panels with an open bottom and bolt on pontoon base.

Low silhouette wedge frames include lower rear adjustable mounting angles, front & rear turret and front & rear vertical steel insert panels, and bolt on pontoon base. Optional laminated front turret panels are available simply by indicating so on your order. The standard writing arm insert panel is supplied as laminate. A steel panel is available as a special item.

Turret, Instrument, Riser
These frames assist in providing proper viewing angles for operators of electronic equipment. Each turret is supplied with non-adjustable fixed mounting angles and a hardware kit.

20° Turret	25° Turret	35° Turret
19° Turret	35° / 55° Turret	55° / 35° Turret
Riser	Instrument

G-Series Frame Options

G-Series frames are fully welded and can handle 2000 lbs. of equipment evenly distributed. These frames provide for secure mounting of your electronic equipment. The following frame options are available: Vertical  |  Dual Bay

Vertical
Vertical frames provide for secure mounting of your electronic equipment in 5 heights, four depths and two panel widths. Each frame includes 2 pairs of adjustable "thru hole" EIA mounting angles and a hardware kit.

Back to Top Dual-Bay Dual-Bay frames accomplish the same thing as baying two frames together, but at a reduced cost. Dual-Bay Back to G-Series Page

10 Series Frame Options

10 Series frames are fully welded and can handle 3500 lbs. of equipment evenly distributed. Available in 19" and 24" rack mount widths, they provide for secure mounting of your electronic equipment. The following frame options are available: Vertical  |  Slope Front  |  -WT |  Wedge  |  Turret 
 

Vertical
Vertical frames provide for secure mounting of your electronic equipment in seven heights, three depths and three panel widths. Each frame includes 2 pairs of adjustable "thru hole" EIA mounting angles and a hardware kit.

Slope Front
Slope front frames are ideal for the development of console configurations. They include front and rear adjustable "thru hole" EIA mounting angles, non-adjustable fixed angles in the top and slope openings and a hardware kit.

12U Slope Opening	10U Slope Opening

-WT
These frames are available with provisions for front mount writing tops. Each frame includes 2 pairs of adjustable "thru hole" EIA mounting angles and a hardware kit.

12U Slope Opening	10U Slope Opening	2 Strut

Wedge
Vertical wedge frames also referred to as “Flat Pack Wedge Kits”, due to the way they ship, are for use in wrap around console configurations. These wedge frames are to be bolted side by side to other cabinets of any panel width or combination of panel widths to form your desired console configuration.

Slope front wedge frames are of fully welded construction and utilize solid non-removable front, top and rear panels with an open bottom and bolt on pontoon base.

Turret
These frames assist in providing proper viewing angles for operators of electronic equipment. Each turret is supplied with non-adjustable fixed mounting angles and a hardware kit.

isoNet Frame Options

isoNet frames are fully welded and can handle 2000lbs. of equipment evenly distributed. Available in 19" and 24" rack mount widths, they provide for secure mounting of electronic equipment. The following options are available: Vertical.

Vertical
Vertical frames provide for secure mounting of your electronic equipment in seven heights, three depths and three panel widths. Each frame includes 2 pairs of adjustable "square hole" EIA mounting angles and a hardware kit.

Vertical

FP1 Frame Options

The following components make up the structure of an FP1 Console. Use them in combination to create the layout that works best for your space. Base and Turret  |  Wedge.

Base and Turret

19” Base	24” Base	19" Turret	24" Turret

Wedges

30° Wedge	45° Wedge	90° Wedge
30° Reverse Wedge	45° Reverse Wedge	90° Reverse Wedge

FP2 Frame Options

The following components make up the structure of an FP2 Console. Use them in combination to create the layout that works best for your space. Legs  |  Bays  |  Frames  |  Wedges.

Legs

Bays

1 Bay	2 Bay	3 Bay

Frames

19" Frame	24" Frame

Wedges