ESQ Side Panel Options

The type of frame dictates the type of side panel that should be used. The following side panels are available with for use with these frames: Vertical and -WT  |  Slope Front  |  Turret  |  Riser  |  Instrument

Formed Inside Removable Side Panels:
For applications where side access is limited and permanent fastening is needed. Choose from solid or louvered styles.

Formed Outside Removable Side Panels:
For requirements where side access is desired. No tools are required. Simply lift up and off.

Flat Inside Removable Side Panels:
For applications where side access is limited and permanent fastening is needed. This type is commonly used when space constraints exist.

For use with Vertical and -WT Frames

Formed Inside Removable Solid	Formed Inside Removable Louvered	Formed Outside Removable Solid	Flat Inside Removable Solid

For use with Slope Front frames

Formed Inside Removable Solid	Formed Inside Removable Louvered	Formed Outside Removable Solid	Flat Inside Removable Solid

For use with Turret frames

Flat Inside Removable Solid Use with 55° / 35° Turrets	Flat Inside Removable Solid Use with 35° / 55° Turrets	Flat Inside Removable Solid Use with 20° 25° or 35° Turrets	Flat Inside Removable Solid Use with 19° Turrets

For use with Riser frames

Formed Inside Removable                Solid

For use with Instrument frames

Formed Outside Removable Solid	Formed Outside Removable Vented	Formed Outside Removable Handled

G-Series Side Panel Options

Choose from two different side panel options: Flat Inside Removable  |  Formed Outside Removable

Flat Inside Removable
These side panels are for applications where side access is limited and internal mechanical fastening is needed. This side panel is commonly used when space is an issue.

Flat Inside Removable

Formed Outside Removable
Outside removable side panels makes secure access easy! Two formed tabs lock the side panel into the bottom of the frame. In addition, two external latch holes near the top accommodate one of four fastener choices, which are ordered separately.

Formed Outside Removable Solid	Formed Outside Removable Vented

Fastener Options

10 Series Side Panel Options

Removable side panels are used to close off the side of 10 Series frames. Two formed tabs lock the side panel into the bottom of the frame and two external latch holes near the top accommodate one of four fastener options, which are ordered separately. Vertical & -WT  |  Slope Front & -WT Slope Front  |  Fasteners.

For Use With Vertical and -WT Frames

Solid	Vented	Solid 42" Deep	Vented 42" Deep

For Use With Slope Front and –WT Slope Front Frames

Fastener Options

isoNet Side Panel Options

Choose from two styles of removable side panels for your isoNet enclosure. Simply lift off by means of (2) two captive 1/4 turn fasteners.

FP1 Side Panel Options

Flat inside removable side panels securely close off the open ends of the base and turret frames.

Base Frame Side Panel	Turret Side Panel