Articulating Monitor Arms

A critical component in creating a healthy, sustainable and ergonomic work space is making sure your monitor is in the correct position. Putting a monitor on an arm can help with this. Articulating monitor arms allow you to adjust the height, tilt, pivot, and rotation of the monitor arm to reach a comfortable ergonomic position. This will in turn increase your efficiency and productivity at the workplace.

Emcor offers a number of different monitor arm configurations that can accommodate one, two, or even three monitors. All of monitor arms are available in two link styles: Straight Link Style and Dynamic Link Style. The monitor arms can be used with three of our product lines – 10 Series,  FP1, or FP2 – simply by swapping out the mount used with the arm.  

Monitor Arm Mounts – FP1

Take advantage of the two-tiered design of the FP1 console. Special mounts accommodate arms in the turret area while a grommet mount base has been engineered to be used with the arms that get mounted on the Top Cap.  

Learn about Emcor FP1 Consoles

Monitor Arm Mounts – FP2

Monitor Arms for the FP2 Console feature a slat wall mount style base that attaches to a hidden salt wall on the back of the console keeping the mount of sight. Position and re-position the mount anywhere along the slat wall. .

Learn about Emcor FP2 Consoles

10 Series Monitor Arm Mounts

Free up valuable rack space. Put your monitor on an arm. Select between two styles; panel or track. Either style allows the side panel to be removed for access to the electronics inside of the rack without having to take the monitor arm off.

Learn about Emcor 10 Series Cabinets ➯

FP1

Articulating Monitor Arms for FP1 Consoles

Articulating Monitor Arms for the Turret
Mount the Fixed Articulating Arm to the Monitor Support Panel in the turret of the FP1 console. Arms hold up to 20 lbs. each. Support Panel sold separately.


Articulating Monitor Arms for the Top Cap
Use these monitor arm configurations on the Top Cap of an FP1 console. Arms hold up to 20 lbs. each. Mount up to three 26″ monitors or two 30″ monitors. Base sold separately.

Straight Link style FP1 Console Monitor Arms: allow for horizontal monitor movement only.

G_MFB12.gif

Single Arm

G_MFB222.gif

Dual Arm

G_MFB3202.gif

Tripple Arm

G_MFB10.gif

Ball Joint

 

Dynamic Link style FP1 Monitor Arms: allow for both horizontal and vertical monitor adjustment improving work space ergonomics.

G_MFB12_D.gif

Single Arm

G_MFB222_D.gif

Dual Arm

G_MFB3202_D.gif

Triple Arm

 


In Field Reconfiguration
This product offering allows in-field re-configurations without disruption to existing equipment. Instead of having to take one arm off to replace it with a dual or triple arm, you can simply add another arm and go.

MFAB2S12S12.gif

MFAB3-B.gif

MFAB2-S12-D.gif

MFAB3-S8S8.gif

FP2

Articulating Monitor Arms for FP2 Consoles

Articulating Monitor Arms for use with the Slat Wall
Use these monitor arm configurations on the Slat Wall of an FP2 console. Arms hold up to 20 lbs. each. Mount up to three 26″ monitors or two 30″ monitors. Base sold separately.

Straight Link style FP2 Console Monitor Arms: allow for horizontal monitor movement only.

S_MFB12.gif

Single Arm

S_MFB222.gif

Dual Arm

S_MFB3202.gif

Triple Arm

S_MFB10.gif

Ball Joint

 

Dynamic Link style FP2 Console Monitor Arms: allow for both horizontal and vertical monitor adjustment improving work space ergonomics.

S_MFB12_D.gif

Single Arm

S_MFB222_D.gif

Dual Arm

S_MFB3202_D.gif

Triple Arm


In Field Reconfiguration
This product offering allows in-field re-configurations without disruption to existing equipment. Instead of having to take one arm off to replace it with a dual or triple arm, you can simply add another arm and go.

MFAB2S12S12.gif

Straight/Straight Dual Arm Add On

MFAB3-B.gif

Straight/Straight Triple Arm Add On

MFAB2-S12-D.gif

Straight/Dynamic Dual Arm Add On

MFAB3-S8S8.gif

Straight/Dynamic Triple Arm Add On

10 Series

10 Series Track Mount and Panel Mount Monitor Arms

Depending on the mount style chosen each kit contains a panel and/or track that fills the opening on the side of a frame. The track comes with a mount for one articulating arm.

Learn more about Emcor’s Track Style and Panel Style Monitor Arm Mounts by clicking on the images below.

*Articulating arm and fasteners sold separately.

Track Style Arm Mount

Panel Style Arm Mount

DON’T SEE WHAT YOU’RE LOOKING FOR? CUSTOMIZE IT!

If you don’t see what you need, we can likely customize the panel or bracket to fit the monitor arm of your choice. Contact us to learn more.

CONTACT US ➧

 
 
Cobalt Cab Video
×
Crenlo Enclosure Video
×