Monitor Arm Mounts

A critical component in creating a healthy, sustainable, and ergonomic work space is making sure your monitor is in the correct position. Putting a monitor on an arm can help with this. Articulating monitor arms allow you to adjust the height, tilt, pivot, and rotation of the monitor arm to reach a comfortable ergonomic position. This will in turn increase your efficiency and productivity at the workplace.

Emcor offers a number of different monitor arm configurations that can accommodate one monitor, two monitors, three monitors, or four monitors. All of monitor arms are available in two link styles: Straight Link Style and Dynamic Link Style. The monitor arms can be used with many of our product lines – simply by swapping out the mount used with the arm.  

FP1

Articulating Monitor Arms for FP1 Consoles

Take advantage of the two-tiered design of the FP1 console. Special mounts accommodate arms in the turret area while a grommet mount base has been engineered to be used with the arms that get mounted on the Top Cap.  

Learn about Emcor FP1 Consoles


Articulating Monitor Arms for the Top Cap
Use these monitor arm configurations on the Top Cap of an FP1 console. Arms hold up to 15 lbs. each. Mount up to three 26″ monitors or two 30″ monitors. Straight Link Style monitor arms allow for horizontal monitor movement only. Dynamic Link Style monitor arms allow for both horizontal and vertical monitor adjustment improving work space ergonomics. Mounting Base sold separately.

Single Arm – Straight Link

Single Arm – Dynamic Link

Dual Arm – Straight Link

Dual Arm – Dynamic Link

Triple Arm – Straight Link

Triple Arm – Dynamic Link

Dual Arm Vertical – Straight Link

Dual Arm Vertical – Dynamic Link


Articulating Monitor Arms for the Turret
Dynamic or Tilt style Articulating Arms to the Monitor Support Panel in the turret of the FP1 console. Arms hold up to 15 lbs. each. Support Panel sold separately.

Dynamic

Tilt

FP2

Articulating Monitor Arms for FP2 Consoles

Monitor Arms for the FP2 Console feature a slat wall mount style base that attaches to a hidden salt wall on the back of the console keeping the mount of sight. Position and re-position the mount anywhere along the slat wall.

Learn about Emcor FP2 Consoles


Articulating Monitor Arms for use with the Slat Wall
Use these monitor arm configurations on the Top Cap of an FP1 console. Arms hold up to 15 lbs. each. Mount up to three 26″ monitors or two 30″ monitors. Straight Link Style monitor arms allow for horizontal monitor movement only. Dynamic Link Style monitor arms allow for both horizontal and vertical monitor adjustment improving work space ergonomics. Mounting Base sold separately.

Single Arm – Straight Link

Single Arm – Dynamic Link

Dual Arm – Straight Link

Dual Arm – Dynamic Link

Triple Arm – Straight Link

Triple Arm – Dynamic Link

Dual Arm Vertical – Straight Link

Dual Arm Vertical – Dynamic Link

Side Panel

Side Panel Track Mount and Panel Mount Monitor Arms

Free up valuable rack space. Put your monitor on an arm. Select between two styles; panel or track. Either style allows the side panel to be removed for access to the electronics inside of the cabinet without having to take the monitor arm off. Side Panel Monitor Arm Mounts are compatible with the 10 Series® product line only.

Track Style Arm Mount

Panel Style Arm Mount

Desk Top

Articulating Monitor Arms for Desk Tops

Create a healthy, sustainable, and ergonomic work space. Put your monitor(s) and/or keyboard on an arm. Swing them into place when needed. Stow them when not in use. Take advantage of the sturdy mounting surface and put up to 4 monitors on one pole. 


Keyboard Tray
This Keyboard tray comes on an articulating arm that can be mounted on a pole. The keyboard tray requires a pole to mount on, so this is most often purchased with Angle Dynamic Arm.

Keyboard Tray

Angle Dynamic Arm


Articulating Monitor Arms for a Desk Top
Use these monitor arm configurations on the desk top. Arms hold up to 15 lbs. each. Mount up to four 26″ monitors or two 30″ monitors. Straight Link Style monitor arms allow for horizontal monitor movement only. Dynamic Link Style monitor arms allow for both horizontal and vertical monitor adjustment improving work space ergonomics. Select from a Grommet or Clamp style baes. Base(s) sold separately.

Single Arm – Straight Link

Single Arm – Dynamic Link

Dual Arm – Straight Link

Dual Arm – Dynamic Link

Triple Arm – Straight Link

Triple Arm – Dynamic Link

Dual Arm Vertical – Straight Link

Dual Arm Vertical – Dynamic Link

Quad Arm Vertical – Straight Link

Quad Arm – Dynamic Link

DON’T SEE WHAT YOU’RE LOOKING FOR? CUSTOMIZE IT!

If you don’t see what you need, we can likely customize the panel or bracket to fit the monitor arm of your choice. Contact us to learn more.

CONTACT US ➧

 
 
Cobalt Cab Video
×
Crenlo Enclosure Video
×