Enclosure Bottom and Base Options

Select the tabs below for options specific to each product line.

ESQ

ESQ Enclosure Bottom and Base Options

The following bottom and base options are available for the ESQ Enclosures product line:  Bottom Panel   |   Riser Base (Pontoon Base)  |  Anti-Tip/Caster Dolly Base  |  

Bottom Panels
These panels can be used to close off all -or portions of- the bottom of the frame. Solid and Perforated styles are most popular.

closure_panel_solid.gif

Solid

closure_panel_vented.gif

Vented

closure_panel_louvered.gif

Louvered

closure_panel_perforated.gif

Perforated


Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.

base_pontoon_vertical.gif

Riser Base (Pontoon Base)

base_pontoon_outlet.gif

Riser Base with Outlet Provisions

base_pontoon_slopewedge.gif

Slope Wedge Riser Base

base_pontoon_verticalwedge.gif

Vertical Wedge Riser Base


Anti-Tip/Caster Dolly Base
This base can be used for anti-tip requirements or as a caster dolly by adding casters. Choose from swivel, rigid, or locking casters – ordered separately.

base_caster_dolly.gif

Anti-Tip Base/Caster Dolly

G-Series

G-Series Enclosure Bottom and Base Options

The following bottom and base options are available for the G-Series Enclosures product line: Bottom Panels  |  Riser Base (Pontoon Base)

Bottom Panels
Bottom panels are designed to close off the entire opening of the bottom of the frame.

bottom_10series_solid.gif

Solid

bottom_10series_perf.gif

Peforated


Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.

base_pontoon_vertical.gif

Riser Base (Pontoon Base)

Back to Top

10 Series

10 Series Enclosures Bottom and Base Options

The following bottom and base options are available for the 10 Series Enclosures product line: Bottom Panels  |  Riser Base (Pontoon Base)  |  Fork Lift Base  | Anti-Tip Base.

Bottom Panels
Bottom panels are designed to close off the entire opening of the bottom of the frame.

bottom_10series_solid.gif

Solid

bottom_10series_perf.gif

Perforated


Riser Base (Pontoon Base)
A riser base (aka pontoon base) is available for applications where raising the enclosure above the floor is required. A riser base (pontoon base) is also used when an electrical outlet is needed in the lower outside area of the frame.

base_pontoon_vertical.gif

Riser Base (Pontoon Base)

base_pontoon_outlet.gif

Riser Base with Outlet Provisions

base_pontoon_verticalwedge.gif

Vertical Wedge Riser Base

base_pontoon_slopewedge.gif

Slope Wedge Riser Base


Fork Lift Base
This base is designed for applications where movement of the populated frame by a fork-lift is necessary. The base provides for front, rear, and side access.

base_forklift.gif

Fork Lift Base


Anti-Tip/Caster Dolly Base
This base can be used for anti-tip requirements or as a caster dolly by adding casters. Choose from swivel, rigid, or locking casters – ordered separately.

base_antitip.gif

Anti-tip Base/Caster Dolly

 
 
Cobalt Cab Video
×
Crenlo Enclosure Video
×